Cadastre-se em nossa newsletter, e receba as melhores ofertas da internet.
Introduction This is an electronic product that not only reduce working temperature of the PS4 console but also cancharge the controller. At the same time, it can be used as a PS4 console stand. It can effectively reduce temperature of the PS4 console, improve function of the console, reduce power loss. The switch of product has two gears to adjust air speed. The OFF gear is used for turning off the fan. The L gear is used for cooling the console with low wind speed. The H gear is used for cooling the console with high wind speed. It can effectively accelerate the console ventilating, prevent the high temperature of console, reduce power loss and extend the life of the console. There are two charging docks for charging PS4 original controller, plug to charge. The charging method of product is same as original charging dock of the PS4 controller, which can effectively extend the life of the controller battery. The product puts the two PS4 controllers and PS4 console together, avoiding the controller being left somewhere and make your gaming space more methodically. Feature 1. The air-vent is rectangular, so two high speed cooling fans are used to blow air in to accelerate the air currency inside of the console andcooling it. 2. Charged through USB interface on the PS4 console. 3. L and H gears for fan speed switching. 4. Can charge two PS4 controllers at the same time. 5. Adopts anti-skid silicone pads on both sides to prevent the PS4 console scratching and slip. Specifications 1.Power Supply: USB 5V (Directly connect to the console through the USB cable) 2. Product Current: Current in gear L: 200mA, Current in gear H: 260mA (when the PS4 controller is not in charging); The maximum charging current is above 800mA when only one PS4 controller is in charging. The maximum charging current is above 400mA when there are two controllers in charging. (The fan not turn on) 3. Maximum speed of the fan: 6000±10%PRM, Maximum volume of air: 12.6 CFM. 4. Charging time: 2.5~3H (Two controllers in charging at the same time)
